← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Vanagon + LED Brake Lights + AudioVox CCS-100
From:Mark Belanger <mbelanger@GMAIL.COM>
Date:Fri, 8 May 2020 00:51:25 -0700

Is this issue specific to third-party CC units or can I expect this fun
when I install the accessory (aka 3rd) brake light kit?

Gracias,
MB

On Wed, May 6, 2020 at 4:27 PM Dug Smith <dug@dugbert.com> wrote:

>
> https://www.st-owners.com/forums/threads/st1300-audiovox-ccs-100-troubleshooting.119551/
>
> Brake Wire Connection:
> The purple wire from the cruise control servo must be connected to the
> positive side of your brake switch. Normally the rear brake switch has
> the easiest access. Connect the purple cruise control wire to the side
> of the brake switch that usually has 0 Volts DC but +12 Volts DC when
> you step on the brakes. You can also connect the purple cruise control
> wire to your taillight brake wire but you'll also need a SPDT relay in
> the circuit. If you have LED taillights or have even added accessory LED
> brake lights you need to use a relay. The purple cruise control wire
> can't sense ground through an LED.
>
> There are some links there to workarounds :o)
>
> On 5/6/2020 3:33 PM, OlRivrRat wrote:
> >               Dennis & Dug or WeEMHTA
> >
> >       Very interesting ~ So is there a way to add a resistance that will
> make the CC happy but will not degrade the
> >
> > LED Output ~
> >
> >
> >
> > On 6 May , 2020, at 3:44 PM, Dug Smith wrote:
> >
> >> Because the cruise control uses the brake light to trigger disengaging,
> it checks the brake light circuit is working before it'll engage, too :o(
> >>
> >> toodle pip,
> >> --
> >>        Dug Smith         | Terry Pratchett: It's almost
> >> (mailto:dug@dugbert.com) |  impossible to ride a rock and roll
> >> (http://www.dugbert.com) |  motorbike and stay on for three verses.
> >>
> >> On 5/6/2020 1:51 PM, OlRivrRat wrote:
> >>>                  To the Vanagon Electrics Wizards
> >>>          I would not have been surprised to discover that My CC Would
> Not DisEngage
> >>> with Brake Apply after LED install but what I am encountering is that
> the CC Will Not
> >>> Engage now that I have LED Brake Lights > I'm Puzzled ~
> >>> Again  >>  AudioVox CCS-100 + Speedo Mounted VSS + Dakota Digi SGI5 ~
> >>>                                                          ORR ~ DeanB
> >
>

--
________________________________________________________________________
Mark Belanger - mbelanger@gmail.com

Next in thread →
Back to May 2020, week 2
Have something to add on this topic today? Revive this thread in the forum »