| Subject: | Re: Problems with cigarette lighter? |
| From: | David Beierl <dbeierl@ATTGLOBAL.NET> |
| Date: | Sun, 22 Aug 2010 18:30:15 -0400 |
At 11:21 AM 8/22/2010, Katherine J. Maas wrote:
>Anyone else had problems with cigarette lighter blowing when you plug in a
>computer with an inverter/adapter? I got a Mac adapter from Mike Gyver and
Lighter socket may have an internal 8-amp fuse,
non-replaceable. Suggest installing some power outlets on a fused
circuit closer to the battery. If there's a way to avoid using the
cigarette-lighter-type sockets, do it; because lighter sockets are
very good for lighters and about as bad as you can get for anything
else. They're an accident of history, like the Qwerty keyboard.
Lighter-plug connections will do much better if you a) make sure
everything involved is shiny-bright and b) tape the plug firmly into
the socket so that the springy pin on the end is always compressed.
Two-pin trailer connector pigtails are a cheap and electrically good
method. However they're ugly and you have to convert your plug-in
wires. If you make up a short pigtail with a trailer connector on
one end and the lighter plug on the other then you can use it both ways.
Yours,
David